Designs Page 2

 

STYLE- LPWLS:

This is a strapless mermaid silhouette style design. The base fabric will be a light pink de-lustured satin fabric with a detailed white mesh fabric overlay on top. It has a sweetheart neckline at the front and a slightly lower back. The neckline and the hem will be trimmed with a stand up circle trim. This skirt will also have a slight train. Other features include; a centre back invisible zip, soft satin lining with an attached tulle petticoat (to flare out the base of the skirt), sewn in boning in the bodice and hanging straps.

 

 STYLE-SSM:

This is a unique but simple silver dress design. The bodice has a strapless sweetheart neckline. The slim-line underskirt and the fitted bodice will be made of  the same silver delustured satin back crepe fabric. The flowy overskirt will be made of a transparent net or organza fabric with a silver applique pattern all over it. Other features include; a waist yoke design detail, soft silver satin lining, princess line seams (on the bodice only), a centre back invisible zip, sewn in boning on the bodice and hanging straps.

 

STYLE-LBPM:

This is a simple elegant mermaid silhouette style design. The fabric will be a light blue de-lustured satin. The front bodice will have a V neckline and will have a small triangle peice covered in pearl trim close to the bottom of the neckline. The back bodice will also be a low V neckline. The whole neckline will be trimmed with the same pearl trim used on the triangle peice. This design also has an triangular empire line seam under the bust. Other features include; full princess line seams, sewn in boning in the bodice, a centre back invisible zip, soft satin lining with attached tulle petticoat (to flare out the base of the skirt) and hanging straps.

 

STYLE-MGPC:

This is a halterneck style dress with a mint green chiffon overlay and a de-lustured satin base underneath. It has a high neckline on the front and a low back. The neckline is trimmed with the same pearl trim as used on the back straps. The top peices of the back neckline have 3 button and loop closures. There is an open gap from the bottom of the top back bodice peices and the rest of the back bodice peices (this is where the centre back zip starts). The waist area has a sheer skin colour peice in the centre and pearl trim above and below it. The chiffon skirt is gathered at the top and flows out to a full flowy style skirt. Other features include; an invisible zip, sewn in boning in the bodice and hanging straps. 

 

 

STYLE-WPM:

The base fabric of this dress design will be a white de-lustured satin. The bodice will have a V neckline in the front and will be trimmed with white pearl trim.The back neckline will be low. The back straps (also pearl trim) will connect to the front neckline trims at the shoulder and then spread out to the princess line seams and the centre back. The skirt will flare out to a full flowy skirt from the waist seam. This skirt will also have a mesh overlay with silver detailing. Other features include; a centre back invisible zip, sewn in boning in the bodice, soft satin lining, an attached net petticoat and hanging straps.

 

 Gold halterneck sparkle mesh ball dress design

 

STYLE-GSMH:

This halter neck dress has a bright yellow de-lustured satin fabric base with a gold sparkle mesh fabric overlay. The neckline and straps are trimmed with a matching colour pearl trim. Under the bust line at the front of the dress there is a cut out design detail. The dress is fitted from the bust to just under the hips and then the skirt flows out to the floor. This dress will be fully lined in soft satin fabric with a centre back invisible zip.